And to top it off…

Its not even the official middle of January and I’ve already got my first top together!  Believe it or not, the majority of the fabric was purchased back in June of 2015 specifically for this quilt idea and then it only took about a week to actually assemble.

Guest Quilt Top

The idea was hatched from a quilt someone posted from I believe Quiltcon 2014, but the bookmarked link I had is now defunct and I can’t seem to find it again.   So if you think it was you and would like the credit you deserve (or just to tell me how unoriginal I am) then drop me a line!

On the knitting front I’ve put together a couple new variations on my market bags, one with a seamless handle design and one a mosaic style to use up some partial cotton balls from the stash.

And then I frogged and restarted a new lace shawl based on the Weirwood Tree pattern. I first started this on the holiday road trip but its a less simplistic lace design which needs a bit more attention.  After getting home with a proper knit companion, its been progressing along. I’m throwing in a few photos I took from the trip (I wasn’t driving at the time) too.

Hope your new year is also producing some good progress too!

In time for a summer road trip

So there was a post earlier about large scale appliqué with a bit of a teaser on this one.  But its so exciting when you get to post it as finished instead of just a work in progress.

TA-DA!

TA-DA!

And here’s the back

Ta-Da Part two!

Ta-Da Part two!

I am actually quite happy with how the quilting of this turned out considering I struggle to draw straight lines WITH a ruler sometimes.   I quilted the outside of the logo on the front and then an all over diamond design.  The back logo was hand sewn on so that it wouldn’t be quilted through to the front.  Its a fleece back with cotton top.

Hopefully this one is a bit better on the backside quilting.

Teslabackzoom

I started this one just prior to a road trip to Idaho with my fiancé, and finished it just prior to our next trip to Oregon.

Getting on Top of the Quilt Tops

Someone asked awhile back about how to do a large central image on a quilt, and at the time I wrote a rambling reply about how I would make such a quilt.  Well since that time, just that sort of quilt has come along “needing” to be made, so I thought I would document and give a bit of a photo tutorial on hand appliquéing a large central image.  (Later I have some machine appliqué planned for the back side, so you can see that method and compare)  This might not be the best way and certainly not the only way to do it, its just how I did it this time.

My quilt top in this tutorial/photos is for our new car blanket.  (You know.. for taking car trips to quilt and yarn stores in other states. ^_~) For materials you will need your fabric, matching thread, a needle and some iron fusible interfacing (I did one sided this time, I’ll do a double sided example when I do the back, but I had some spare one sided from my Mario Quilt [keep scrolling for an update on that]).  

The first thing you will want to do is get an outline of your image.  Many office supply stores or printing locations can offer you a large scale print, or you can use an internet source that will scale the image across multiple letter size pages you print at home, such as Blockposters.com which is what I did in this situation.  If your image is not symmetrical you will want to either print it flipped horizontally or trace from the back side of the page.  After you have your image you want to trace it onto your interfacing on the non-fusible side.

My block print was four letter pages wide.

My block print was four letter pages wide.

Once you have your image fully traced onto the interfacing, you will want to cut it out.  In my sample its two pieces.

You can check your design by simply flipping the fusible side up.  It should look like it is facing the correct way.

You can check your design by simply flipping the fusible side up. It should look like it is facing the correct way.

Next you are going to take your fusible pieces and iron them onto your design color fabric.  If you have multiple pieces, you can lay them out however best fits your fabric, so long as you maintain at least a 1/4 inch or more buffer around your pieces.

Here's mine ready to be ironed down.

Here’s mine ready to be ironed down.

You will then cut your fabric at least 1/4 inch around each of your pieces.  You will be folding over that edge onto the non-fusible side of your interfacing and ironing down.  You may find that for curves and points you may need to cut into that selvedge a bit in order to get the fabric to follow the lines of your template.  What you have done at this point is make your giant image a slightly stiffer patch.  The interfacing helping to give you smoother lines.

Ironing in my edges on the big piece.

Ironing in my edges on the big piece.

You will then flip your patch over, place and pin to your background.

All pined down

All pined down

You are then ready to begin stitching your piece onto the background.  Now growing up I used to have this step great grandmother that was teaching me about piecing and I am quite certain that no matter how tiny my stitches looked to me, they were just not small enough.  She was either right, or just cranky, but at any rate… here’s some tips on how to make tiny stitches.

The travel of the thread should mostly be behind the  background fabric.  When you place your needle going down into the background, you want to bring the point back up right along the edge of your top piece, use that as your guide.  When going into and out of the top patch piece you want the needle to move along the folded edge of your piece and not bring it up through the top of the piece.

Now before I wrap this tutorial bit up and get onto the list of other things I managed to work on since last month…. I want to take a moment to talk about how you assemble your background fabric.  For this quilt I am aiming for a mostly twin size quilt. I am planning to back this quilt with fleece that is a bit over 60 inches wide and a nice slightly larger than 80 inches long.  Most quilt fabric is roughly 42-44 inches wide.  I could have chosen to use 2 pieces, in which case my image would be right over the central seam, but since I didn’t want a seam there, I chose to split my fabric into 3 pieces, like the illustration below.

Writing out notes and diagrams can be very useful.

Writing out notes and diagrams can be very useful.

Which brings us to the Tesla Quilt Top!  In need of some ironing and then its time to sandwich and quilt!

Ta-DA!

Ta-DA!  BTW, if you do a central piece like this, you can wait to seam together the background fabric until after you are done appliquéing the front design, which saves a bit on how much fabric you have to manipulate around.

Ok so now that the How To portion is done… I did say Tops (plural!) in the title. So guess who finally finished all her Mario QAL blocks?  That’s right.. THIS GAL!  I even sashed the top blocks together.

So here’s the progress on that quilt top.

This also needs ironed... but I am also planning to do a bit of a border and I needed to lay it out to calculate the math.

This also needs ironed… but I am planning to do a bit of a border and I needed to lay it out to calculate the math.

I have also knit up three socks.  (Yes I know they usually come in pairs!) I am participating in Sock Madness this year… so you will eventually see all those socks in a later post.  Other bits to look forward to would be finishing up these two quilt tops into actual full quilts, and I am yarn swapping and fabric swapping this year.